740 gl again

How do you remove the ignition switch mechanism?
It seems to me that you would get the oxy cutter out and start at the
boot,(aus) trunk,(American) and cut off everything that does not look
like the ignition switch till you get at it.

F Murtz <(E-Mail Removed)> wrote
>How do you remove the ignition switch mechanism?
>It seems to me that you would get the oxy cutter out and start at the
>boot,(aus) trunk,(American) and cut off everything that does not look
>like the ignition switch till you get at it.

Please post the video on Youtube!
--
Roger Hunt

On 2/18/2010 02:58, F Murtz wrote:
> How do you remove the ignition switch mechanism?
> It seems to me that you would get the oxy cutter out and start at the
> boot,(aus) trunk,(American) and cut off everything that does not look
> like the ignition switch till you get at it.
The Column Lock or the Starter Switch ??

--
"Some people are like a Slinky.....not really good for anything,
but you still can't help but smile when you shove them down
the stairs."

GlennK wrote:
> On 2/18/2010 02:58, F Murtz wrote:
>> How do you remove the ignition switch mechanism?
>> It seems to me that you would get the oxy cutter out and start at the
>> boot,(aus) trunk,(American) and cut off everything that does not look
>> like the ignition switch till you get at it.
> The Column Lock or the Starter Switch ??
>
Just the starter switch, although if the whole contraption is removable
it would be easier to work on.
I am having starter problems where the solenoid is not energized
sometimes.Could be switch on neutral or park. Is there a switch on seat
belt? (seatbelt has not stopped it before)Is there any thing else in
start circuit.

On Feb 17, 11:58*pm, F Murtz <hagg...@hotmail.com> wrote:
> How do you remove the ignition switch mechanism?

This way ...

http://www.swedishbricks.net/700900F...20in%20740/940

Mr. V wrote:
> On Feb 17, 11:58 pm, F Murtz<hagg...@hotmail.com> wrote:
>> How do you remove the ignition switch mechanism?
>
> This way ...
>
> http://www.swedishbricks.net/700900F...20in%20740/940


I did read that before asking the question but can not find little pin
to push and in any case there is no room above to get at if it exists.
Is this pin one inch from front of cylinder or back?
I did see a pin on left between cylinder and column but it wont move.
This description only would get cylinder out anyway, not switch
mechanism. My problem seems insurmountable so far.

F Murtz wrote:
> Mr. V wrote:
>> On Feb 17, 11:58 pm, F Murtz<hagg...@hotmail.com> wrote:
>>> How do you remove the ignition switch mechanism?
>>
>> This way ...
>>
>> http://www.swedishbricks.net/700900F...20in%20740/940
>>
>
>
> I did read that before asking the question but can not find little pin
> to push and in any case there is no room above to get at if it exists.
> Is this pin one inch from front of cylinder or back?
> I did see a pin on left between cylinder and column but it wont move.
> This description only would get cylinder out anyway, not switch
> mechanism. My problem seems insurmountable so far.

I checked the switches on gear shift and they work but the ignition sw
does not seem to send power to starter.
So I am going to have to remove ignition switch and I can not see how yet.