2000 s80, can i fit volvo front fog lamps?

i wanted to fit some foglamps off a scrap s80, i have the complete
light switch with the extra f/l switch on, can i just connect the
lamps to the wiring under the blank fog lamp plates, or is there a
software change?

col

On Jul 12, 7:46 am, coli...@hotmail.com wrote:
> i wanted to fit some foglamps off a scrap s80, i have the complete
> light switch with the extra f/l switch on, can i just connect the
> lamps to the wiring under the blank fog lamp plates, or is there a
> software change?
>
> col

You can wire them directly which means they stay on when high beams
are on. Or you can wire them through the CPU which will shut them off
when high beams are on. In the latter case the CPU will have to be
set to recognize the addition of new lamps. Check with a dealer.

cheers for that,
maybe have a word with the dealer.

col

On Thu, 12 Jul 2007 06:42:32 -0700, Roadie <(E-Mail Removed)> wrote:

>On Jul 12, 7:46 am, coli...@hotmail.com wrote:
>> i wanted to fit some foglamps off a scrap s80, i have the complete
>> light switch with the extra f/l switch on, can i just connect the
>> lamps to the wiring under the blank fog lamp plates, or is there a
>> software change?
>>
>> col
>
>You can wire them directly which means they stay on when high beams
>are on. Or you can wire them through the CPU which will shut them off
>when high beams are on. In the latter case the CPU will have to be
>set to recognize the addition of new lamps. Check with a dealer.

dont suppose you know where i can get info on all the relays and what
they control?


On Thu, 12 Jul 2007 06:42:32 -0700, Roadie <(E-Mail Removed)> wrote:

>On Jul 12, 7:46 am, coli...@hotmail.com wrote:
>> i wanted to fit some foglamps off a scrap s80, i have the complete
>> light switch with the extra f/l switch on, can i just connect the
>> lamps to the wiring under the blank fog lamp plates, or is there a
>> software change?
>>
>> col
>
>You can wire them directly which means they stay on when high beams
>are on. Or you can wire them through the CPU which will shut them off
>when high beams are on. In the latter case the CPU will have to be
>set to recognize the addition of new lamps. Check with a dealer.