1984 245 pinouts for AMM

  • Thread starter Thread starter jd
  • Start date Start date
J

jd

During a check of the emissions system on this B23F Jetronic
II, I noticed that the connector for the AMM had been taken
apart and electrical taped back together. Oddly enough the
ground wire was very loose and the engine ran much better
with it disconnected. Now I am curious to see if the
connector is wired properly. Does anybody have the pinout
for the AMM connector for this vehicle? I would like to
check all of the connections and see if the AMM is working
properly.
jd
 
jd said:
During a check of the emissions system on this B23F Jetronic
II, I noticed that the connector for the AMM had been taken
apart and electrical taped back together. Oddly enough the
ground wire was very loose and the engine ran much better
with it disconnected. Now I am curious to see if the
connector is wired properly. Does anybody have the pinout
for the AMM connector for this vehicle? I would like to
check all of the connections and see if the AMM is working
properly.
jd

According to the Bentley 240 manual, I think this should be what you
need (I checked it three times):

Wire Color Terminal # on AMM
_________________________________
WHITE - 8
ORANGE - 9
GREEN/TELLOW - 6
BLACK - 36
WHITE/RED(?) - 7
YELLOW - 12

__ __
Randy & \ \/ /alerie's
\__/olvos
'90 245 Estate - '93 965 Estate
"Shelby" & "Kate"
 
Randy G. said:
According to the Bentley 240 manual, I think this should
be what you
need (I checked it three times):

Wire Color Terminal # on AMM
_________________________________
WHITE - 8
ORANGE - 9
GREEN/TELLOW - 6
BLACK - 36
WHITE/RED(?) - 7
YELLOW - 12

__ __
Randy & \ \/ /alerie's
\__/olvos
'90 245 Estate - '93 965 Estate
"Shelby" & "Kate"

Thanks, this is exactly what I need, I will let you know how
it works out.
jd
 
jd said:
During a check of the emissions system on this B23F Jetronic
II, I noticed that the connector for the AMM had been taken
apart and electrical taped back together. Oddly enough the
ground wire was very loose and the engine ran much better
with it disconnected. Now I am curious to see if the
connector is wired properly. Does anybody have the pinout
for the AMM connector for this vehicle? I would like to
check all of the connections and see if the AMM is working
properly.
jd

\


Go to a junkyard and snip the connector off a car there with a few inches of
wire, then splice it in matching the colors, that should be an improvement
over the taped together connector.
 
Back
Top