2.4i exhaust cam position

Discussion in 'Volvo V50' started by goatkeeper, Mar 10, 2013.

  1. goatkeeper

    goatkeeper

    Joined:
    Mar 10, 2013
    Messages:
    2
    Likes Received:
    0
    When pulling the head off my volvo v50 today I lost the position of the exhaust cam. I took the sprocket off to get timing belt out of way. Than I pulled the head off without putting the sprocket back on.

    How do I figure out which way it goes. I can't find any kind of marking on the cam, only on the sprocket. There are three different ways for it to go, because there three bolts that hold on the sprocket.

    Does anyone have a exhaust cam for a 2.4i that they can look at?


    Thanks,
    Joseph
     
    goatkeeper, Mar 10, 2013
    #1
  2. goatkeeper

    kaleb

    Joined:
    Aug 28, 2013
    Messages:
    1
    Likes Received:
    0
    hello joseph , i was wonderingn if you found a way to re align the sprocket to the cam? i have the same problem and cant seem to find any information or diagrams . thanks by the way
     
    kaleb, Aug 28, 2013
    #2
  3. goatkeeper

    mark0006

    Joined:
    Apr 18, 2014
    Messages:
    6
    Likes Received:
    0
    Joseph,

    If you found your solution please post it has my friend is going through the same issue.

    Thanks
     
    mark0006, Apr 18, 2014
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. B230f Motor Could my Cam be seized ?

  2. 240 Replacing Cam Oil Seal

  3. 1986 244 DL Sedan Cam Shaft Oil Seal

  4. k grind cam

  5. adjustable cam pulley

  6. 850 cam belt...Any Tips?

  7. Cam Position Questionable '94 850 Turbo. 200K+ miles

Loading...