89 240 - testing cold start injector?

Discussion in 'Volvo 240' started by kickingback99, May 30, 2011.

  1. kickingback99

    kickingback99

    Joined:
    Apr 21, 2011
    Messages:
    1
    Likes Received:
    0
    does anyone know the resistance of the cold start injector if it is working...75% sure it is faulty... i have checked voltage at plug on harness and i am showing voltage. i am showing 11.7 ohms on cold start injector that has been removed. I know that the way to check this is to leave it connected but removed from intake, but hey, why do things the easy way? cannot find specs. Any help appreciated...
     
    kickingback99, May 30, 2011
    #1
  2. kickingback99

    finnegan

    Joined:
    Dec 17, 2018
    Messages:
    16
    Likes Received:
    0
    Even if the voltage is correct the injector is a mechanical injector. So it can fail mechanically. I'll see if my book has voltage spec. But fail proof way is to pull it. Put it in a glass jar. Start motor and see if it squirts. Mine has a THERMAL TIME SWITCH as well. It tells the injector when to squirt and for how long based on the temperature of the engine. Good luck.
     
    finnegan, Dec 21, 2018
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 86 240 DL cold start injector failure symptoms

  2. Cold start problem, 240, '89, B230F

  3. Broken 240 Fuel Injector Electrical Connector 240

  4. Volvo 240 cold start problem

  5. Ping : Rod Gray , Re: Pleeease Help !!! 240 cold start problem

  6. Cold start injector - B230E 740

  7. Cold start injector

Loading...