Clearing the SERVICE warning light - '95 850

  • Thread starter Thread starter blurp
  • Start date Start date
B

blurp

Hi all,

My 1995 850GLT had the dashboard "SERVICE" light on so I figured I'd
check ALL the codes while I was resetting it. I went through the code
checking and clearing procedure for every socket on the
engine-compartment diagnostic interface and verified codes were
cleared by getting 1-1-1 at the end but still the SERVICE light stays
on.

Any ideas?

Thanks in advance,
blurp

As an aside, some of the diagnostic sockets do not generate any
response (e.g. A6-Ignition System doesn't generate 1-1-1 or any other
codes)... any ideas what I might be doing wrong? I suppose the socket
might be corroded/oxidized...
 
Hi all,

My 1995 850GLT had the dashboard "SERVICE" light on so I figured I'd
check ALL the codes while I was resetting it. I went through the code
checking and clearing procedure for every socket on the
engine-compartment diagnostic interface and verified codes were
cleared by getting 1-1-1 at the end but still the SERVICE light stays
on.

Any ideas?

Thanks in advance,
blurp

As an aside, some of the diagnostic sockets do not generate any
response (e.g. A6-Ignition System doesn't generate 1-1-1 or any other
codes)... any ideas what I might be doing wrong? I suppose the socket
might be corroded/oxidized...
Click to expand...
A7>4-1-5-1>
 
You must log in or register to reply here.
Back
Top