One piece hub and bearings on a 1995 940?

Discussion in 'Volvo 940' started by Don, Oct 21, 2005.

  1. Don

    Don Guest

    Recently i found out that my 1995 940 wheel bearings are pressed into the hubs
    and have to be purchased together! Has anyone tried to replace the bearings
    without
    replacing the hub? Pressing out the old bearings and in new ones? Mine seem fine
    for now
    but obviously they will have to be replaced at some point. I don't relish the
    thought of
    spending $200 per hub for a $30 bearing...

    Thanks
    Don
     
    Don, Oct 21, 2005
    #1
  2. Don

    Erik Lidén Guest

    My teacher tried to replace only the bearing. He couldn't manage to press
    the whole bearing out, he just pressed it apart, resulting in a purchase of
    a new hub.

    /Erik Lidén
     
    Erik Lidén, Nov 2, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. is the c70 a piece of crap?

  2. '90 740GL: Front End Bushings cost $30 a piece?

  3. 740 Turbo 1990 support bearings and U-joints lifetime

  4. Which one of these cars are the safest, and which one should I get?

  5. Tie rods and wheel bearings

  6. 760 two-piece to one-piece stereo change

Loading...