You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
P1800S Restoration
- Thread starter ddrbrend
- Start date
I'm restoring a 1966 P1800S. It came with a wood rim steering wheel. Unfortunately the stainless steel has cracked and can't be welded. Can anyone help with a replacment?
Try http://brickboard.com or the Yahoo 1800 list ... Mate. If you need air filters try http://su-filters.com
P.S. Any competent machine shop with a TIG welder should be able to fix it.
cheers!
Dave said:Try http://brickboard.com or the Yahoo 1800 list ... Mate. If you need air filters try http://su-filters.com
P.S. Any competent machine shop with a TIG welder should be able to fix it.
cheers!
Dave, if it is an original volvo option wheel it is worth fixing, one sold on ebay last week for over $1200.00
good luck,
george
calgary
faustus said:Dave, if it is an original volvo option wheel it is worth fixing, one sold on ebay last week for over $1200.00
good luck,
george
calgary
Yes, that is the point I was trying to make, it is likely 304 stainless which is easy to re weld, you might have to machine out the rivets that hold on the wood to keep from frying it but, after welding, the bead could be machined down close and the wheel frame - bead blasted or brushed back to very close to it's original condition then the wood re-riveted.
Cheers!
Dave G.
http://su-filters.com