PCV Breather Box Procedure

Discussion in 'Volvo 940' started by vvan15, Oct 27, 2019.

  1. vvan15

    vvan15

    Joined:
    Oct 27, 2019
    Messages:
    2
    Likes Received:
    0
    I've got a 95 Volvo 940 non-turbo that has 230K miles and running fine except an oil leak from the reak crankcase seal. Did a rubber glove test on the oil filler and the glove fills up instead of getting drawn in. I figured that the breather box had never been serviced so I want to try changing that first. What's the procedure for replacing the breather box? Can't figure out how to do that without removing the whole intake manifold and throttle body. Anyone have the procedure written up somewhere?
     
    vvan15, Oct 27, 2019
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. V40 PCV/Oil separator

  2. 1982 240 brake bleed procedure

  3. 1982 240 brake bleed procedure

  4. 740 trunk struts replacement procedure?

  5. R&R PCV on '98 V70 T5

  6. 96 850 brake bleed procedure

  7. replacing a tailgate wiring harness--illustrated procedure and tips

  8. PCV Box, performance, and root cause of sludge?

Loading...