Volvo/ Alpine double DIN head unit lamps

Discussion in 'General Motoring' started by Mark Ferns, Jun 6, 2004.

  1. Mark Ferns

    Mark Ferns Guest

    My headunit has a blown bulb. I know it's the bulb as I've taken the
    facia off the unit and swapped the bulds around (there are 4 in total
    on this unit) so I know it is not the bulb socket/ pcb which is at
    fault.

    Does anyone know how/ where to get a replacement bulb(s) and what to
    ask for?

    Any help appreciated.

    Mark
     
    Mark Ferns, Jun 6, 2004
    #1
  2. Mark Ferns

    Mike F Guest

    The bulbs are available from Radio Shack without the holders. You can
    take your old dead bulb out of the holder and put the new one in.

    --
    Mike F.
    Thornhill (near Toronto), Ont.

    NOTE: new address!!
    Replace tt with t (twice!) and remove parentheses to email me directly.
    (But I check the newsgroup more often than this email address.)
     
    Mike F, Jun 7, 2004
    #2
  3. Mark Ferns

    Mark Ferns Guest


    Do you know the part number/ description as we no longer have Radio
    Shack in the UK (was Tandy) so I will need to seek an alternative
    supplier.

    Thanks

    Mark
     
    Mark Ferns, Jun 12, 2004
    #3
  4. Mark Ferns

    mikef2316() Guest

    you need:
    http://www.wamcoinc.com/Lamp_Catalog/page16.htm
    I suggest line 27, 14V if possible, although I could only find 12 volt
    ones, and have had no problems so far (about 18 months on new bulbs).

    --
    Mike F.
    Thornhill (near Toronto), Ont.

    NOTE: new address!!
    Replace tt with t (twice!) and remove parentheses to email me directly.
    (But I check the newsgroup more often than this email address.)
     
    mikef2316(), Jun 13, 2004
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.