(92 Volvo 240) Unable to remove the rotor from inside the distributor

  • Thread starter Thread starter Mike
  • Start date Start date
M

Mike

Is there something that I should know about removing the rotor from
inside the distributor (92 Volvo 240)? I just try to pull it up but is
not coming out. Is there a pin or I need to do something else?

Please help
Mike
 
Mike said:
Is there something that I should know about removing the rotor from
inside the distributor (92 Volvo 240)? I just try to pull it up but is
not coming out. Is there a pin or I need to do something else?

Please help
Mike
Click to expand...


They jam on there pretty tight sometimes, I've had to break them apart
before to get them off. Now I grease the shaft lightly before installing
the new one, seems to help.
 
Thank you James, I'll try it.

Mike

James said:
They jam on there pretty tight sometimes, I've had to break them apart
before to get them off. Now I grease the shaft lightly before installing
the new one, seems to help.
Click to expand...
 
I tried to take one off yesterday, no go, so I cracked it off with a small
hammer and chisle, wear eye protection the chips are like bullets. Then
some lubrication on the shaft and press the rotor strait down firmly.
 
You must log in or register to reply here.
Back
Top