93 850 Transmission code- What is 1-2-2 code?

  • Thread starter Thread starter jbcrow
  • Start date Start date
J

jbcrow

Hi,
I have a 93 850 with the blinking arrow indicator. I read the
code at the A1 socket and it comes back 1-2-2. Does anyone have a list
of the codes who could tell me what this indicates? Also, I tried
clearing the code by holding the test button for 6 seconds and
releasing and then holding again. I doesn't seem to clear. Did I miss
something?

TIA
JB
 
jbcrow said:
Hi,
I have a 93 850 with the blinking arrow indicator. I read the
code at the A1 socket and it comes back 1-2-2. Does anyone have a list
of the codes who could tell me what this indicates? Also, I tried
clearing the code by holding the test button for 6 seconds and
releasing and then holding again. I doesn't seem to clear. Did I miss
something?

TIA
JB
Click to expand...


1-2-2: Break in solenoid S1 circuit

You will not be able to clear the trouble codes before they have all been
read and the first code have apeared again. maybe this can be the problem
about clearing codes.
you should try reading out the codes as you already did but wait for some
time to see when the code appears again, if its the same it was the only
one.
If the code does not appear for a long time, you could try to push test
button again for 1 to 3 seconds and the release to see if another code
comes up.

Regards

Per Hauge
 
You must log in or register to reply here.
Back
Top