M
me
Any ideas?
I does it with the wheel turned in either direction.
I does it with the wheel turned in either direction.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
B
~^ beancounter ~^
poss a loose tie rod end...or bolt, nut...etc...
P
PButler111
Subject: 940 clunks / snaps when i backup up with the wheel turned
Have you seen your kids/pets/spouse since you first noticed the clunk after
backing up?
From: "me" [email protected]
Date: 6/7/2004 8:36 PM Central Daylight Time
Message-id: <[email protected]>
Any ideas?
Have you seen your kids/pets/spouse since you first noticed the clunk after
backing up?
A
ALRHALL
Aim straight, put the brakes on, hang out the front window and watch the LF
wheel as yiu move foreward and backward. Does the wheel move with respect to
the car? If so change the strut rod bushings (two cone shaped rubber disks on
each side) Easy job with the correct wrenches. Brickboard has the procedure.
Al.
wheel as yiu move foreward and backward. Does the wheel move with respect to
the car? If so change the strut rod bushings (two cone shaped rubber disks on
each side) Easy job with the correct wrenches. Brickboard has the procedure.
Al.
M
me
I new that one was coming....
;-)
;-)
PButler111 said:Have you seen your kids/pets/spouse since you first noticed the clunk after
backing up?