960 Exhaust Q

Discussion in 'Volvo 960' started by ipellew, Aug 23, 2005.

  1. ipellew

    ipellew Guest

    Hi;

    Is the exhaust system the same on a 1992 and a 1995 960?

    I have a Stainless one on my written off 92 I want to put on my 95
    Volvo 6Cyl 960

    The Same car but for the interior upgrade.

    I notice all the back end is diiferent on the 95 model to the 92 one.

    Regards
    Ian (Leic UK)
     
    ipellew, Aug 23, 2005
    #1
  2. You will need to carefully examine the two to see if they are compatible.
    The hangers may be in different positions as the rear suspension is
    Independent on the 1995. The rear spring is a flat Carbon Fibre element
    which fits across the car. On your '92 there are two coil springs and
    Nivomat shock absorbers. Your '95 will also have Nivomats possibly a
    slightly different pattern.

    I had a similar problem when fitting the stainless steel exhaust from my 760
    saloon onto my 940 estate. The exhaust fitted perfectly but it's hangers had
    to be altered.

    All the best, Peter.

    700/900/90 Register Keeper,
    Volvo Owners Club (UK).
     
    Peter K L Milnes, Aug 24, 2005
    #2
  3. ipellew

    ipellew Guest

    Hi all;

    The Q referred to the 960 Saloon, Early 960 Estates are revamped 745's

    I have changed the Exhaust between the cars (92 - 95) no problem.
    Oh - other than the weight of the back box, phew.
    I had to be carefull of the 'O' ring between the cat and first box

    The Rammer car went under the rear bumper so the 'S' exhaust outlet
    pipe took must of the crash impact, so orf to the Stainless Steel maker
    to get it fixed.

    Regards
    Ian
     
    ipellew, Aug 24, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.