Another garage rip-off ( gettin screwed again)?

Discussion in 'General Motoring' started by harrington8800, Sep 4, 2003.

  1. harrington8800

    harrington8800 Guest

    had rebuilt calipers installed frt of 87 240 with linings and 2 short
    stainless lines Class A couldn't bleed and gave up next guy condemned Master
    cylinder $300.00 installed same problem (even appears he disconnected brake
    failure switch so light would not show on dash. I was fuming has been about
    4 days with out car down to day 5 now and he has insisted I required the
    master but actually the left front caliper was defective from the get go. I
    say I didn't need a new master at all, who's with me on this one? if master
    was perfectly okay before replacing calipers why master is suddenly
    defective?
     
    harrington8800, Sep 4, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 100K engine light won't stay off....... 1996 850 GLT.. I can turn it off but come back on.

  2. B21A gettin' old.

  3. What's the word on Sooter's Garage in Aurora, Ontario

  4. RIP My 240; Whats the skinny on 740s

  5. Volvo Garage in Barrie?

  6. OXYGEN SENSOR rip off

  7. No Start Wet - Again & Again Ready To Junk It ! 200 1989

Loading...