I was not so worried about a leak as just an internal problem with one
of the cylinders not operating properly. If it is working now then
this was not the problem... or at least, if the mechaniuc is honest,
we can assume so.
Many are not- they "automatically" adjust.
That's is better news.
In the US (or at least in California) I believe tha tthe shop is
required to show you (or give you) the old parts unless you decide you
don't wan tthem. For that kind of money I would have carefully
inspected the old parts. But it is possible that if the old pressure
plate failed it could have caused the symptoms you mentioned.
__ __
Randy & \ \/ /alerie's
\__/olvos
'90 245 Estate - '93 965 Estate
"Shelby" & "Kate"
