D
Danny
Turn signal flasher unit clicks all by itself firing no lights. The
blinkers and hazards work properly. I have replaced the flasher and
the hazard switch, checked and cleaned many grounds, disconnected the
tailgate wiring harnesses and the 'Ghost' click survived. This morning
I ran a jumper wire from terminal 49a on the flasher unit to the
corrosponding terminal on the steering column directional switch.
Naturally the hazards don't work like this because I have disconnected
it's feed from the blinker switch. I could have sworn I initially
heard a 'Ghost' click immediately thereafter but I took it for a ride
and definately heard none during my 10 minute drive. This is certainly
the longest reprieve by far as of yet so I may have isolated it. If
this is indeed the source, I would like to find out how to repair the
seat belt warning circuit.
How do I troubleshoot that part of the circuit? Is my car supposed to
have light bulbs in the seat belt receptacles? (Meaning the place
where I snap the seat belt into it's locked position. I also realized
yesterday that although I get a five second warning via the dashboard
light, to attach my seat belt, it allows me to drive without seat belt
attached without any further lights lighting, is that faulty
behaviour?
Thanks and keep the love flowin'
Danny
blinkers and hazards work properly. I have replaced the flasher and
the hazard switch, checked and cleaned many grounds, disconnected the
tailgate wiring harnesses and the 'Ghost' click survived. This morning
I ran a jumper wire from terminal 49a on the flasher unit to the
corrosponding terminal on the steering column directional switch.
Naturally the hazards don't work like this because I have disconnected
it's feed from the blinker switch. I could have sworn I initially
heard a 'Ghost' click immediately thereafter but I took it for a ride
and definately heard none during my 10 minute drive. This is certainly
the longest reprieve by far as of yet so I may have isolated it. If
this is indeed the source, I would like to find out how to repair the
seat belt warning circuit.
How do I troubleshoot that part of the circuit? Is my car supposed to
have light bulbs in the seat belt receptacles? (Meaning the place
where I snap the seat belt into it's locked position. I also realized
yesterday that although I get a five second warning via the dashboard
light, to attach my seat belt, it allows me to drive without seat belt
attached without any further lights lighting, is that faulty
behaviour?
Thanks and keep the love flowin'
Danny