Fuel injector, replace tip cover, or just seals? 240 '86

Discussion in 'Volvo 240' started by DL152279546231, Oct 10, 2004.

  1. DL152279546231

    DL152279546231 Guest

    My parts store sells a Bosch fuel injector seal kit for my '86 240 which
    includes 4-5 pieces, 3 seals, a small gray round plastic thing which looks like
    a spacer, and a plastic cap with a pin hole in it which I believe covers the
    end of the injector. Do I need all of these parts, should I use them or just
    leave them alone if I am trying to stop a fuel leak on one injector?
     
    DL152279546231, Oct 10, 2004
    #1
  2. DL152279546231

    Vic Guest

    where is the injector leaking? where it meets the fuel rail?

    Vic Ithaca, NY
     
    Vic, Oct 11, 2004
    #2
  3. DL152279546231

    James Sweet Guest

    A fuel leak? As in into the injector or is it leaking and flooding the
    intake?

    I replaced the caps on some injectors recently just because the kit came
    with new ones, probably wouldn't bother unless the originals were cracked or
    otherwise damaged though.
     
    James Sweet, Oct 16, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1983 B21FT - Injector seals size?

  2. Fuel injector leaking, or O-ring? 240 non T

  3. Disconnecting 240 Fuel Injector Electrical Connectors (what have I done?)

  4. Broken 240 Fuel Injector Electrical Connector 240

  5. More Fuel Injector woes (weird 240)

  6. Fuel Injector Tip Cover??? (remove?) 240

  7. fuel injector on a 240

  8. Borken fuel line fuel distributor to injector 240

Loading...