Not getting fuel

Discussion in 'General Motoring' started by Jim, Jul 6, 2013.

  1. Jim

    Jim

    Joined:
    Jul 6, 2013
    Messages:
    1
    Likes Received:
    0
    Hi, I have a 2000 V70 XC that I bought with what was supposed to be a blown head gasket.
    It turnd out that the engine was overheated to the point that the head melted between the exhaust valves on cylinders 2,3,&4.
    I replaced the head. There is fuel to the injectors and the engine runs on starting fluid but not coming out of them. I thought that it must be the ECM, so I replaced that with no change.
    A multimeter shows 11.89 volts on one of the wires to the injector and 3.88 volts to the other. That is the same at all 5 injectors
    Does anyone have a clue want the problem may be?
     
    Jim, Jul 6, 2013
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.