problems with car imobilizer

Discussion in 'General Motoring' started by eurwyn thomas, Mar 18, 2006.

  1. can some one please help me?

    Car - Volkswagen Golf GTI
    imobilizer - sigma M800

    have had the car for a week and everything running fine untill today... i
    managed to start it and it cut out on me, i tried again and again and again
    and ....nothing! locked the damn thing and left it for about 20 min and
    tried again...bingo! i then turned off the ignition and have not been able
    to re start ir since.... i am at the end of my tether...if any one has any
    understanding of this problem i would be more than gratefull for your advice!

    living in hope

    eurwyn thomas
     
    eurwyn thomas, Mar 18, 2006
    #1
  2. eurwyn thomas

    John Smith Guest

    Had exactly same problem with my Volvo. They thought it was either the
    chip in the key or the receiver in the ignition. Turned out the ignition
    barrel was on its way out and had it replaced (way overpriced but what
    choice do you have?). Seems OK now.

    Hope this helps
     
    John Smith, Mar 18, 2006
    #2
  3. eurwyn thomas

    User Guest

    Try using a different key. May need a new halo ring. Find someone with a
    VAG com or VAG com software that can read the immobiliser.

    Bob
     
    User, Mar 19, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.