Seat belt problem

Discussion in 'General Motoring' started by Pleasantly Surprized, Oct 23, 2003.

  1. Pleasantly Surprized

    Pleasantly Surprized Guest

    The drivers side seat belt will not release from the column so that it can
    be lengthened and attached to the clasp. Are there any easy fixes for this
    without removing the column panel? Is the seat belt controlled
    electonically in any way that a blown fuse could fix it?
     
    Pleasantly Surprized, Oct 23, 2003
    #1
  2. Pleasantly Surprized

    RobertV70 Guest

    Very dangerous, the seat belt uses explosives to tension the belt in case of
    a crash, they should be treated with great care.
    They are controled by the crash sensor which also fires the airbags.
    Be carefull !

    Robert
     
    RobertV70, Oct 23, 2003
    #2
  3. Pleasantly Surprized

    Clant Westwood Guest

    No offense but,
    you must be an american, right ???
    Sorry, couldn't resist commenting it.
    Good luck!
    /Clant
     
    Clant Westwood, Oct 23, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. how to replace 94 940 seat belt

  2. Wanted: 240 Seat belt front

  3. Seat Belt Stucked

  4. seat belt light volvo460

  5. Seat Belt Question

  6. driver's seat belt stuck

  7. Seat Belt/Ignition Key Alarm Relay

  8. v70 Seat belt stuck

Loading...