V40 Radio Mute

Discussion in 'Volvo V40' started by Peter Burden, Jan 19, 2004.

  1. Peter Burden

    Peter Burden Guest

    Hi All

    I have just installed a Nokia (Cark 134) hands free kit. This comes with a
    wire that connects to the mute wire of the radio. The problem is I think
    it maybe pin 9 of the 14 pin plug but I'm not sure, also if it is, do I cut
    the cable and connect the new one to it or join the new cable to the
    existing.

    Hope someone may be able to help.

    Thanks
    Pete
     
    Peter Burden, Jan 19, 2004
    #1
  2. Peter Burden

    Mike F Guest

    On my 1998 V70 the mute is pin 9 on the 14 pin connection on the back of
    the radio. If the back of your radio doesn't look like this...
    http://www.volvospeed.com/Repair/radiocon.htm
    then don't use what I've said. Pin 9 on the connector marked "A" in
    this picture is for mute.
    (My radio had no wire in this location.)

    --
    Mike F.
    Thornhill (near Toronto), Ont.

    NOTE: new address!!
    Replace tt with t (twice!) and remove parentheses to email me directly.
    (But I check the newsgroup more often than this email address.)
     
    Mike F, Jan 20, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.