V70 Classic yr 2000 (old shape) F/OS Brake Caliper

Discussion in 'Volvo V70' started by Mark, Sep 9, 2007.

  1. Mark

    Mark Guest

    Hi I have had to purchase a second hand brake caliper for the front off
    side (Drivers side on the right in the uk) does any one have any tips for
    the fitting it does look quite straight forward but I am a little unsure if
    there is a bleeding proceedure for the fluid any help is greatly apreciated
    many thanks Mark
     
    Mark, Sep 9, 2007
    #1
    1. Advertisements

  2. Mark

    Roger Mills Guest

    In an earlier contribution to this discussion,
    You'll certainly need to bleed the brakes when you've fitted it.

    Make a careful note of how that 'orrible bit of springy wire fits on the
    outside, so you can put it back in the same way (it's a right sod to get it
    to spring into position!). Also note that you'll need a 7mm Allen key (or
    male hex socket tool) to undo the pins (behind a rubber/plastic cover) which
    hold the calliper in place. 7mm is a non-standard size, and most sets of
    Allen keys don't have one!

    The whole process is described in more detail in Haynes manual No. 3573.
    --
    Cheers,
    Roger
    ______
    Email address maintained for newsgroup use only, and not regularly
    monitored.. Messages sent to it may not be read for several weeks.
    PLEASE REPLY TO NEWSGROUP!
     
    Roger Mills, Sep 9, 2007
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.