In an earlier contribution to this discussion,
I had the same problem - and mine was down to the pipe coming off the pump.
Have you made sure that the water is appearing under the bonnet when you try
to operate the rear washers?
The pipes are a bit fiddly to get at, but you have removed the reservoir's
filler tube (which is just a push fit, with an 'O' ring seal) you can get
your hand in.
--
Cheers,
Roger
______
Email address maintained for newsgroup use only, and not regularly
monitored.. Messages sent to it may not be read for several weeks.
PLEASE REPLY TO NEWSGROUP!
