Volvo 960 Alarm / Remote Control

Discussion in 'Volvo 960' started by Erik Berntsen, Jun 2, 2005.

  1. Erik Berntsen

    Erik Berntsen Guest

    Volvo 960 3.0 1995. How do I re-program the alarm after replacing the
    batteries in the remote control (key chain)?

    Erik
     
    Erik Berntsen, Jun 2, 2005
    #1
  2. Erik Berntsen

    Wilson Guest

    Make sure all doors, hood, and trunk are closed.
    Turn the ignition on and off 5 times within 10
    seconds. On the fifth try, leave the ignition on.
    Press either button on the transmitter.
    The first transmitter must be programmed within 15
    seconds, the others within 10 second intervals.
    When the alarm system accepts the codes from each
    transmitter, the LED on the dash will glow
    steadily for several seconds.
    Switch the ignition off and test the transmitters.

    message
    news:BdEne.11822$...
     
    Wilson, Jun 2, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 2002 V70 remote control

  2. Remote control 900 series 1987

  3. Remote Control Starters

  4. How to change batteries of the remote control of the central door mechanism

  5. Question re: Setting Alarm using remote ... (1998 V70)

  6. if alarm was on and battery then died, will alarm be on again when itis charged?

Loading...