1992 960 noisey engine belt.

Discussion in 'Volvo 960' started by ipellew, Feb 28, 2005.

  1. ipellew

    ipellew Guest

    Hi All;

    I have a squeek coming from the front of 1992 960 3L-B6304 engine.

    The exposed ancillary pumps belt one sees with the bonnet up, has two
    idler pulleys, one is the tensioner, the other right beside it, is
    static.
    I think this staic pulley has a bearing starting to fail as ther are
    signs of rust around the bolt head.

    I cannot find a solution to this on brickboard, but I guess it is a
    simple job to get the pulley out and repair what is necessary.

    So to my question:-
    Is this pulley on ball/roller races or is it a crude bush round the
    holding bolt that just needs cleaning-lubricating?

    Are there any hints on how to hold back the tension pulley while
    removing belt?

    Regards
    Ian
     
    ipellew, Feb 28, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. thinking of buying 1992 960 sedan

  2. Timing Belt on a 960

  3. 960 (1992) 3 litre engine oil leak.

  4. 1995 Volvo 960 Accessory (Serpentine) Belt

  5. volvo 960 1992 transmission problems

  6. 1992 volvo 960 rear shock absorber replacement

  7. Drive Belt Location For 1992 Volvo?

  8. Noisey 960 with Fault code on 1995 960

Loading...